2012 Selway Fisher Lynx 16 Trailer Sailer - £3,995
Status : FOR SALE > NEW LISTING
Lying : Oxfordshire - Viewing strictly by appointment through Topsail
(Please scroll down to the 'Images' section below for more photos.)
Designer : Selway Fisher Designs
Builder : Home completed from plans
LOA : 4.88m (16ft 0in)
LOD : 4.8m (15ft 9in)
Beam : 2.05m (6ft 9in)
Maximum Draft : 1.15m (3ft 9in)
Air Draft : 0.35m (1ft 2in)
Keel : Lifting
- Wood construction (marine ply, stitch and tape and strip plank)
- U shaped hull with 3 planks per side
- Lifting keel with twin bilge boards
- Home built by original owner to very high standard
- Approx. dry weight : 500kg (1,100 lbs)
- Ballast (water) : up to 300kg (660 lbs)
- Designer's usage guidance : Inland, estuary and coastal
Rigging & Sails
- High peaked gaff cutter
- Wood mast/spars
- Mainsail (tan, good condition)
- Jib on further (tan, good condition)
- Sail area by design : 12.8 sq.m
Mechanical & Electrical
- 4hp Mariner 4 stroke outboard motor (very low hours, service history, starts first time every time)
- 2 berths in 1 cabin
- 2 further occasional berths possible in cockpit (no berth cushions for these included in sale)
- Chemical toilet
- Ample storage
- Maximum headroom 1.29m (4ft 3in)
- RM single axle, braked road trailer (model 2b12, recent new bearings and ready for use)
- Further inventory TBC
Built in 2012, this Selway Fisher Lynx 16 is understood to have been constructed and finished to a very high standard by her original owner. Believed to be in sound condition throughout, she is offered for sale complete, including trailer and four stroke outboard, and ready to tow and sail!
Preliminary listing and subject to change. Further details coming soon!
DELIVERY: The vendor is prepared to deliver the boat locally (within a TBC radius of Oxfordshire).
Sales description (courtesy of Selway Fisher Designs)
The LYNX 16 has been designed to meet the needs of the sailer who requires a modern small trailable boat. To retain the maximum possible internal living space she has twin bilgeboards which are mounted in cases below the bunks leaving the sole space completely free of obstructions. Furthermore, the pivots for the steel boards are outside the hull in the skegs which means that there are no leaks ,and the control of the boards is in the cockpit. Optional water ballast tanks giving over 300 kg of ballast are incorporated below the bunks. A simple gunter rig has been used to keep the spar lengths down for easy trailing and the skegs allow her to, sit easily on the trailer. She has an outboard well and the cabin sides go right out to the hull sides giving comfortable sitting space inside and a large deck area to work on. The cockpit seats are big enough to have 2 people sleeping on them under a boom tent. The hull is of double chine shape developed from our Micro 18 and Highlander designs to give a fast and stable hull form. Construction is based upon the stitch and tape/epoxy method using pre-shaped ply hull and frame panels so that the building time is kept to a minimum.
DISCLAIMER: Topsail Marine Yacht Brokers is acting as brokers (or in the case of classified adverts, advertising medium) only and unless stated otherwise the vendor is not selling in the course of business. Whilst every care has been taken in their preparation, the correctness of particulars is not guaranteed and they are intended as a guide only. Prospective purchasers are strongly advised to check all particulars and where appropriate employ an independent qualified agent to carry out a survey and/or sea/river trial. Vessels are offered subject to prior sale, amendment or withdrawal without notice.
You are welcome to link to this page, but please do not use content in any other way without our permission.
2012 Selway Fisher Lynx 16 Trailer Sailer - 2430 Cirrus 22082208