Roberts Spray 37 Project - £8,000

Status : NOT FOR SALE

Lying : Yorkshire - Viewing strictly by appointment through Topsail

(Please scroll down to the 'Images' section below for more photos.)

General Specification

Designer : Bruce Roberts
Builder : Ron Atherton
LOA : 11.28m (37ft 0in)
Beam : 3.66m (12ft 0in)
Draft : 1.22m (4ft 0in)
Keel : Long

Construction

• GRP construction
• Based on the Spray 28 design
• Very heavily built (using female mould)
• Epoxied (2 coats) below the waterline
• Hull is insulated with 1/2in closed cell foam overlaid with 2oz mat

Mechanical & Electrical

• No engine

Accommodation

• 3 cabins
• Wheelhouse forward of the cockpit
• Main saloon is 2.4m x 3.7m (8ft x 12ft) and requires fitting out
• Aft of the saloon, the galley (currently just consists of carcasses) is to starboard and the heads compartment to port
• Cooker with 4 burners, grill and oven is included in the sale
• Separate heads compartment (all GRP mouldings) is nearly finished
• Rear cabin goes under the cockpit sole
• Forward of the saloon there is a further double cabin fitted out with a 2.1m (7ft) bed and lockers and draws finished in oak (requires completing)
• Headroom 1.88m (6ft 2in)

Remarks

This very heavily built hull is a stretched Spray 28. She was built by the builder for his own personal use, and subsequently sold to the current owner. She is now for sale due to a change of plans, and would ideally suit someone who wishes to fit out a vessel to their own specifications. Lying ashore.