1991 Roberts Spray 28 - £12,000
Lying : Yorkshire - Viewing strictly by appointment through Topsail
Designer : Bruce Roberts
Builder : Humber Boat Company
LOA : 8.53m (28ft 0in)
Beam : 3.05m (10ft 0in)
Draft : 1.07m (3ft 6in)
Keel : Long
- GRP construction
Rigging & Sails
- Bermudan Cutter rig
- Aluminium mast/spars
- Roller reefed jib
Mechanical & Electrical
- Yanmar 2GM20 diesel
- 4/5 berths (vessel needs complete refit)
- As currently configured, the boat has a double berth and wardrobe in the bow, aft of which, to starboard, is the heads. There is then a settee berth to either side. Aft of these, to port, is the galley, opposite which is the navigation station. Lastly, there is a quarter berth to starboard.
- Bulkhead compass
- Navico Log
- Depth sounder (condition unknown)
- Stainless steel pulpit, pushpit, stanchions and guardlines
This boat was originally built by someone who completed the hull, superstructure and rig, fitted an engine, and then went sailing! In consequence she is in need of a complete refit. She comes complete with a cooker, water heater and shower all of which almost certainly need removing/refitting. Sprays are renowned for their toughness and this, combined with the volume contained within a comparatively modest overall length, must make her an attractive proposition, particularly if you have the time and ability to complete the works she requires yourself.
DISCLAIMER: Topsail Marine Yacht Brokers is acting as brokers (or in the case of classified adverts, advertising medium) only and unless stated otherwise the vendor is not selling in the course of business. Whilst every care has been taken in their preparation, the correctness of particulars is not guaranteed and they are intended as a guide only. Prospective purchasers are strongly advised to check all particulars and where appropriate employ an independent qualified agent to carry out a survey and/or sea/river trial. Vessels are offered subject to prior sale, amendment or withdrawal without notice.
You are welcome to link to this page, but please do not use content in any other way without our permission.